Feature
Able to measure from simple shape to complicated shape- Pressurizing ability 3-50 tons
- Equipment with high reliability due to many years of experience
Principle
This equipment is an automatic CNC servo press machine specialized in powder processing.
①Consists of die set(die , upper/lower punch) and powder feeder.
②Powder filling: material powder is filled in cave of die by powder feeder.
③Upper punch stand-by: upper punch descends after filling up to the die surface position.
④Pressurization: mold with pressure.
⑤Extraction: product can be extracted after upper/lower punch ascends.
⑥Discharge: next powder filling step starts after product is pushed out.
Purpose
Press molding of ceramics materials etc.
Specification example
| Type | ＡＰＣ-20ＳＳＡ | ＡＰＣ-20ＳＡ |
|---|---|---|
| Maximum press force | 20,000kgf | 20,000kgf |
| Maximum extrusion force | 7,000kgf | 7,000kgf |
| Maximum filling depth | 100mm | 130mm |
| Maximum lower pressure stroke | 70mm | 90mm |
| Maximum extrusion stroke | 100mm | 130mm |
| Bottom ram control speed | 6 steps control per 10% from 50% to 100% of upper ram speed | |
| Bottom ram stroke | 150mm | 180mm |
| Upper punch hold down stroke | 70mm | 75mm |
| After pressing volume | 0～20mm | 0～20mm |
| Under fill or over fill volume | 0～10mm | 0～10mm |
| Upper punch pressure position adjustment volume | 60mm | 65mm |
| Die surface position adjustment volume | 20mm | 20mm |
| Bottom ram stopper capacity | 7,000kgf | 7,000kgf |
| Molding speed | 6～40SPM | 6～30SPM |
| Filling volume automatic control system | Filling depth control by applied pressure monitoring | |
| Upper ram drive electric type | 7.5Kw AC Servo motor |
7.5Kw AC Servo motor |
| Bottom ram drive electric type | 7.5Kw AC Servo motor |
11Kw AC Servo Motor |
| Press shut height | 500mm | 550mm |
| Machine weight | About 3,200kg | About 3,600kg |
